новые продукты


Cable Tray CLICK KF…

Cable routing
Assembly of cable trays KF… with screwless connection in the following applications:
– in the electrical installations mounted on the grounded steel structures
– in the electrical installations with a voltage to 1kV
– in hydraulic, pneumatic systems, etc.

Benefits:
– Electrical continuity confirmed by the relevant certificate
– Fast and easy assembly
– Firm snap-in connection
– Deep stamping around the slots in the bottom increase the strength
– Dense perforation with stamping around the slots for excellent heat
exchange – designed to enable cable tray installation on supports from
BAKS anywhere within the system
– Slotted holes Ø11 in the cable tray bottom allow for suspension on a threaded rod

Product

Versatile CLICK Fittings – New Product

Benefits:
– Fittings adjusted for standard cable trays and CLICK cable trays

Product

ZPDN Cover Clamp – New Product

Protection of cover against slipping off

Benefits from application:
– Cover clamp made of stainless steel for increased strength and nice appearance
– High resistance against corrosion
– Modified clamps for improved interaction with the cover
– Versatile application to solid and perforated cable trays
– Complete with the bracket WSU…, with an option of a screwless cable tray assembly

Cover Clamp ZPNN… – New Product

Protection of cover against slipping off

Benefits from application:
– Modified shape allows for application in standard cable trays and wire mesh cable trays
– Cover clamp made of stainless steel for increased strength and nice appearance
– High resistance against corrosion
– Modified clamps for improved interaction with the cover

Barrier Strip PG…– New Product

Lengthwise division of cable trays

Benefits:
– New and versatile barrier strip fits to any perforation of cable trays – no need of hole drilling

Product

NAP… Protection Cap for Barrier Strip

Features & Benefits:
– nice appearance of Barrier Strip closure
– protection against cable damage
– protecting installers against cut from steel edges,

Modified CLICK Connector for Wire Mesh Cable Trays KDSZ…

Connector modified to allow connecting cable trays also from the top – through additional cutting in the connector’s bottom

Product

Fittings with perforation in the bottom KKSH…, and TKSH… – New Solution

Benefits:
– Large openings in the bottom for easy exit of cables
– Protection caps for additional protection of cables against damage
– Improved ventilation of cables

Product KKS
Product TKS

Wire Mesh Cable Tray KDSD300H50, Connector LKDSC, and  Ceiling Hangers UKDSC, UKDSPC

Cable routing

Benefits from application:
– Possibility of assembly directly to the ceiling

Product KDSD
Product LKDSC
ProductUKDSC
Product UKDSPC

Wire Mesh Elbow KKSD…

Benefits:
– Low weight of elements for easy elbow assembly
– Fast assembly
– Lower price as compared to the steel solid elbows
– Ready to use product of 60 – 300 mm widths
– Assembly with the standard wire mesh cable trays and with wire mesh cable trays KDSZ…

Wire Clamp for Wire Mesh Cable Trays USKD

Assembly of 60 mm wire mesh cable trays with the standard brackets directly to the wall or to the floor

Benefits:

– Extremely fast and screwless assembly of wire mesh cable tray

Product

Snap-in Support PMMCS…

Fixing the wire mesh cable trays

Benefits:
– Extremely fast and screwless assembly of wire mesh cable trays

Product

Mounting Connector for the Fittings PKKS, PSKS, PDKS

Fast arrangement of wire mesh fittings

Benefits from application:
– Adjusting the elbows to wire mesh cable trays
– Screwless pre-assembly
– Strengthening the construction with a screw
– Adjustment of the elbow internal radius

Product PKKS
Product PSKS
Product PDKS

Hanger UKWD

Fixing the wire mesh cable trays KDS50H35, KSG50H35, KWDS60H60 to the brackets WW, WPLS, WPTS, and to the channels

Benefits from application:
– Fast installation

Product

Angle Connector LKSUC

Branching out cable routes in any spot of the wire mesh cable tray. Suits cable trays 60 and 110 mm high

Benefits from application:
– Branching out cable routes
– Fast and reliable screwless assembly in any spot of cable route

 Product

Wire Hanger WSKD

Suspending wire mesh cable trays to the ceiling – Assembly of wire mesh cable trays 60 and 100 mm high

Benefits:
– Extremely fast and screwless assembly of wire mesh cable tray
– Fast assembly directly to the ceiling or using a threaded rod
– Hangers suit cable trays 60 mm high

Product

Hanger USH

Assembly of wire mesh cable trays to the brackets

Benefits:
– Fast assembly of accessories to wire mesh cable trays
– Assembly of wire mesh cable trays on brackets with standard perforation

Product

Blind End ZKLS

Closing the cable runs

Benefits from application:
– Fast and screwless assembly
– Aesthetic appearance of cable run closing

Product

Wire Clamp CZD

Wire clamp allows for extremely fast and screwless assembly of cable trays and wire mesh cable trays of H60 height with constructions based on the channels 40H20, 40H22, 41H21, 40H40 i 41H41 mm, with the brackets WPL…, WTL…, WPT/WPTO… and WWT

Product

Cable Ladder CLICK DF…

Cable routing

Assembly of cable ladders DF… with screwless connection in the following applications:
– in the electrical installations mounted on the grounded steel structures
– in the electrical installations with a voltage to 1kV
– in hydraulic, pneumatic systems, etc.

Benefits:
– Electrical conductivity confirmed by the Certificate issued  at the relevant Institutes in Germany
– full perforation in the sides allows for connecting cable ladder in any spot after cutting, and another cable ladder or a       fitting can be joined with the use of connector – no drilling is needed
–Fast and easy assembly

– Firm snap-in connection
– No connectors are needed
Product

Hold Down Clamp UDU… – Versatile

Fixing the self-supporting cable trays and ladders of 100, 110, 120, 150 and 200 mm height to  I-Beam

Benefits from application:
– Fast and easy assembly of self-supporting cable trays and ladders on steel constructions
– The top rotary part allows for symmetrical clamp assembly  (in line)
– Two versatile clamps with height adjustment: one for the cable trays and ladders 100, 110, 120 mm high and one for the cable trays and ladders 150, 160, 200 high

Product UDU1
Product UDU2

Mounting Set for Cable Ladder ZMD…

Cable Ladder assembly upside down onto the wall with the use of channels

Benefits from application:
– Fast and easy assembly
–In this particular type of cable ladder assembly extremely high strength parameters are obtained with the muntin bar application

Product ZMD1
Product ZMD2
Product PLTS

Cable Ladder Holder UDD

Fixing the cable ladders and self-supporting cable ladders to I-Beam

Benefits from application:
– Assembly in any spot of the cable tray’s side
– Fast and easy cable ladder assembly to steel structures with I-Beam or angle profile

Product

Dense side perforation – New Solution

Benefits:
– Full perforation in the sides allows for connecting cable tray or cable ladder in any spot after cutting, and another cable tray or cable ladder, or a  fitting can be joined with the use of connector – no drilling is needed,
– Improved ventilation of cables in self-supporting cable trays

Protection cap NODS

Benefits:
– Protection of installer in case of contact with sharp edges in the cable tray or self-supporting cable tray cutting point
– Improving overall aesthetic appearance
– Protection of cables against damage while pulling

Galvanized Junction Box POPZA… with the Lock of Opening and Aluminum Cover for Protective Conduits, a Junction Box for the Channels POKZA…

Complete junction box ready for direct installation on raised floors and concrete floors. The box with galvanized and aluminum elements designed for application in a dry environment

Benefits:
– Universal cover which allows installation in the lining, gres or stone
– Adapted to the electrical accessories- module 45 standard

– Fast and intuitive box assembly
– Different material finishing (aluminum and stainless steel)

– Adjustable junction box height
– Knockout holes for protective conduits

Product POPZA
Product POKZA

Galvanized Junction Box POPA… with the Aluminum Cover for Protective Conduits, Junction Box for the Channels POKA…

Complete junction box ready for direct installation on raised floors and concrete floors. The box with galvanized and aluminum elements designed for application in a dry environment

Benefits:
– Universal cover which allows installation in the lining, gres or stone
– Adapted to the electrical accessories- module 45 standard
– Fast and intuitive box assembly,
– Different material finishing (aluminum and stainless steel)
– Adjustable junction box height
– Knockout holes for protective conduits

Product POPA
Product POKA

Ship Cable Tray and Cable Ladder Systems

The tests are currently being performed with BAKS Ship Cable Tray and Ladder Systems which have been approved for use on ships and oil rigs. Positive test results are to be confirmed by the relevant certificate
Product Tray
Product Ladder

Luminaire Cable Tray CLICK KLF…

Suspending luminaire runs

Benefits:
– Fast and easy assembly
– Firm snap-in connection
– No connectors are needed

Product KLFL…

Channel CLICK CMF…

Fast and screwless assembly of supporting structures for the lamps – no connectors are needed. Creating the trusses in large production halls or warehouse facilities in the form of supporting constructions for fixing the variety of installation equipment. Unique system of channel connection with excellent strength parameters

Benefits:
– Electrical conductivity confirmed by the Certificate from the Institutes in Germany
– Fast assembly
– Firm snap-in connection
– No connectors are needed
– Wide range of available sizes: 41H41, 41H62, 50H50, 60H60 i 100H100

Product CMF…41H41
Product CMF…41H62
Product CMF…50H50
Product CMF…60H60
Product CMF…100H100

New sizes of the Channels CM…41H21, CMP…41H42, CM…41H41, CMP…41H82

Benefits:
– Channel sizes adjusted to the European standards
– Double riveted channels significantly improve strength parameters

Fast Assembly Channel Nut – Rhomboid NSP  for the Channel Connectors, and Channel Connector LCSP…

Benefits:
– Elastic mechanism for comfortable positioning of the fixed element by pressing down and moving
– Serrated rhomboid nut used for strong connection and safety
– Fast montage allows for savings in time and effort both at assembly and dismantling

Product NSP
Product LCSP
Product LCSP1
Product LCSP2

Spacer BR…

Benefits:
– Improved strength parameters
– Wide range of sizes allows for optimal selection of the suitable ceiling bracket
– The special shape prevents the plate from falling down into the profile slotted hole at assembly

Product

Channel Connectors LCWL…, LCWLL…, LCWLP…, LCWT…  LCWCZ…

Connecting the constructions to the channels of  50, 80 and 100 mm widths.

Benefits:
– Fast method to arrange spatial constructions with the channels
– Special cuttings allow assembly both to the face or through the connector
– Firm and stable channel connection
– Possibility of connection with the standard screws on each side of a channel

Product LCWL
Product LCWLL
Product LCWLP
Product LCWT
Product LCWCZ

Connectors LCWL, LCWLL, LCWLP, LCWT, LCWCZ

Connecting the constructions with the channels 40 and 41 mm wide

Benefits:
– Fast method to arrange spatial constructions with the channels
– Special cutouts for the channel assembly directly to the face or with the use of through holes
– Firm and stable channel connection
– Perforation adjusted to all channels of 40H40 and 41H41
– Possibility of connection with the standard screws on each side of a channel

Product LCWL
Product LCWLL
Product LCWLP
Product LCWT
Product LCWCZ

Support for Rooftop SDB…

Modular system of supports used for the installation of cable runs, air conditioning devices, tubes, power generators, walkways, photovoltaic solar panels, etc.,  directly on flat roofs.  The system adjusted to support channels 40×40 or 41×41. Through application of anti-slip insulation a srewless assembly is possible directly to the roof

Benefits of application:
– Assembly of supporting structures on roofs with tar paper – no harm is made to the roof sheeting
– Anti-slip insulation mat provides for uniform load distribution

Product SDB40
Product SDB50

Base Plate PVC

Assembly of channels to the base or to the ceiling

Benefits:
– Easy assembly of the channels 50H50, 80H80 and 100H100 to the base, or to the ceiling
– Arrangement of firm constructions

Product PVC50
Product PVC80
Product PVC100

Bracket WWS… (modified)

Suspending cable routes

Benefits:
– Extended bracket can be attached on each side of the Head Plate from BAKS along with the channel of 40 mm size    including the open side – no additional elements are needed
– Easy access for the installer without the need to use specialist tools

Product

Bracket WSU

Suspending cable routes

Benefits:

– Cover assembly using the same clamp is possible after the cable laying operation
– Assembly of cable trays, wire mesh cable trays and cable ladders
– Thanks to high elasticity ZAPU clamps allow for the channel assembly both with the use of cover or without cover
– Easy and fast assembly
– Assembly to the wall or to the bracket with one screw only
– Increased width allows for assembly to the open part of the channels 40 mm and 41 mm.
– Bracket adjusted to screwless assembly of cable trays using the clamps soon available in the offer

Product

Center Hanger ZCS1

Suspending cable routes

Benefits:
– specially serrated surface provides for additional protection for the clip against slipping off
–Ø 14 mm opening allows for screwless assembly of cable clips OZC…, , or alternatively, the assembly of threaded rods and hooks
– A solid base to install firm fixing on steel constructions without drilling and welding

Product

Head Plate with Barrier Strip PSBR

Suspending cable runs on double channels

Benefits from application:
As a complementary solution for the system
– Extremely strong base for any new double channels 41H82 (PSBR)
– Integrated spacer in the base for protection of the channels against deformation- reduction of time needed for assembly
– Possibility to install the bracket on each side of a channel (also on the open side, which allows for smooth bracket adjustment)

Product

Head Plate PSKK

Benefits from application:
– As a complementary solution for the system
– Extremely sturdy base for the channels
– Special type of construction reduces the time of assembly and prevents the channel from deformation

Product

Head Plate PSB

Fixing the threaded rod, cable clip, etc. to I-Beams, angle profiles, etc.

Benefits:
– As a complementary solution for the system
– Extremely sturdy base for the new double channels 41H42
– Special type of construction reduces the time of assembly and prevents the channel from deformation
– Assembly of brackets to the open side of the channels which allows for smooth regulation

Product

Beam Clamp ZCD… and Cable Clip OZC…

Fixing the threaded rod, cable clip, etc. to I-Beams, angle profiles, etc.

Advantages of ZCD:
– Specially serrated surface for additional protection of the fixed beam clamp against slipping off
–Ø 14 mm opening in the threaded rod or in the hooks
– Provides a good basis for firm fixing on steel structures without drilling and welding

Advantages of OZC:
– Fast and easy assembly with using the beam clamp
– Plastic washer on a screw for protection against falling out at assembly

– Wide range of cable diameters for any size of cable clip

Product ZCD
Product OZC

Ceiling Bracket WPCB… and Bracket WWB …

Bracket adjusted to suspending cable routes on the ceiling bracket WPCB….

Benefits from application:
– Very fast and easy assembly
– Increased strength

Product WPCB
Product WWB

Anchor KHZ6- with a closed hook and  Eye Anchor KO6

Fixing the ceiling constructions to a concrete base

Benefits from application:
– Fast assembly
– Easy length adjustment
– Easy to remove

Product KHZ6
Product KO6

Self Locking Nut NSAM…

For connecting system elements exposed to vibrations, and in a seismic environment

Benefits:
– Nuts with protection against self-loosening
– No washers are needed (extremely fast and easy assembly)

Product

KRDP Expansion Bolt – New and SMART version

A cap at the end of threaded rod for protection of thread against damage

Benefits from application:
– Two components used for improved bolt expansion and for obtaining high load capacity regardless of the base surface
– SMART bolt action depending on the type of surface (expansion, distribution, looping), now with even wider range of   applications
– Superb expansion in any situation – intuitive recognition of the bolt maximum expansion point
– No bolt rotation while screwing due to specially shaped teeth
– A hole in the bolt for easy screwdriving and firm fastening
– The longer bolt version allows to break through any hard surface

Nylon Adjustable Fixing KRNU…

Benefits:
– Small diameter of opening (10 mm) and short adjustable element (39 mm) provide for easy assembly in a narrow or insulated slot
– Two-component adjustable element reinforced with glass fibre and T-bushing for obtaining high pull-out and shear resistance  capacity
– The fixing does not interfere with plasterboard, and consequently, the base surface is not weakened
– Universal type of seating allows for connection with a threaded rod, rod with metric thread, and a nut
– In solid materials such as concrete and wood anchor bolts can be used
– Easy process of pre-assembly – with the use of T-bushing bolts can be fixed without a screw
– Several fixing points may be used in a small distance from each other
– A screw can be loosened and tightened repeatedly

Screw SBSO6X4

Benefits:
– Screw SBSO6 with two different screwing depths for maximum versatility
– Low depth of a drilled opening and reduced depth of screwing allow for fast and easy assembly
– SBSO6 screw with reduced length and reduced screw-in depth is a rational and economical choice for variety of applications
– SBSO6 screw has been approved for multipoint fixing in non-structural systems. SBSO6O has been approved for fixing the stressed channel ceiling panels

T-Grid Clamp ZRT

Benefits:
– Allows for fixing the suspension cables, wires, S hooks, or chains to T-Grid
– Fast, simple, and safe assembly
– Assembly without tools

T-Grid Clamp ZRTS

Benefits:
– ZRTS allows for fixing the electrical accessories to T-Grid of acoustic modular ceiling
– Assembly without tools
– Fast, simple, and safe assembly

NGP Rod Cap

Placed at the end of rod for protection against damage

Benefits from application:
– Fast and easy assembly without tools

Product

Cover Hinge ZPR

Fast lifting of cable tray’s cover

Benefits from application:
– Fast and easy assembly without tools,
– Assembly at any point of cable tray’s side

Product

Cover Support PPKM…

Internal cover protection against bending while walking on cable trays

Benefits from application:
– Allows to walk safely on cable trays used for power supply to machines – reduced risk of cover deformation – should be used every 0,5 m

Product

Barrier Strip POZ for Cable Hanger OZ/OZO

Separating the cables in a cable hanger

Benefits from application:
– Screwless assembly inside the cable hanger
– Barrier strip allows for separating cable bundles depending on the intended use

Product

Cover Lock ZAMKN – New Product

Protection of cover against slipping off. DIY type of assembly in the cover

Benefits from application:
– An arrow placed at the screw head indicates the lock position
– Lock activation by turning to the right or the left
– Blockade of elements made of spring steel
– The lock adjusted to a torx or flat-head screwdriver
– Possibility of montage directly on the construction site

Shears NDCP…

Used for cutting the following rods: M6, M8, M10 and M12

Benefits from application:
– Cutting the threaded rods of three different diameters
– Precise, fast and burr-free cutting
– The process of cutting is harmless to a thread
– Comfortable handle provides for easy shears operation
– Shears arms of adequate length provide for effortless and smooth rod cutting
– Simple opening of the shears

Product

Zinc Paste WSZINK

Efficient protection against corrosion

Benefits from application:
– Efficient protection against corrosion
– Variety of paste capacities according to the customer’s needs
– Paste in aerosol form for easy application
– Very high zinc content ~75% (over 90% in the pigment)

Product

Battery Shears for Wire Mesh Cable Trays NAKS

Battery powered device for cutting wire mesh cable trays, also for fast and clean cutting of cable trays made of stainless steel up to  6mm thick.

Benefits:
– Open rotary cutting head
– Electronic control and monitoring of the cutting process
– Optional operation with one button only to control functions of all the tools
– Ergonomic two-element housing with soft handles for easy and safe operation with one hand only
– The balanced centre of gravity provides for simple and smooth shears operation
– LED backlight used in order to illuminate the workplace
– 18 volt  Li-ion and NiMH batteries of high capacity and extremely short time of charging
– High-efficiency engines with the maximum working speed
– Energy-saving function – the engine is stopped immediately after cutting
– The engine is stopped immediately to increase the safety of shears operation
– Auto-retractable blade after cutting
– Retraction of the blade manually when necessary
– Multifunction LED backlight for the purpose of maintenance and with battery charge indicator
– Environment friendly hydraulic fluid with short period of biodegradation

Product

Profile Nibbler PN200

Used for the C, L, U trapezoid sheet profiles deep to 85 mm, corrugated sheet of max. 2 mm thickness and strength value of 400 N/mm2
BENEFITS:
– Device with reduced tool length (for processing sheet profiles deep to 85 mm,  and for the C-L-U profiles, cable trays, and corrugated sheet)
– Excellent solution in places with difficult access (working direction can be 360° changed easily, without tools,  in 45-degree steps
– Extremely short time needed for the set-up (replacement of stamp and yoke is made without interruption – no tools are needed)
– Unrivalled speed of operation (fast and efficient, 2.1 m/min. for structural steel 400 N/mm2).

Product