новые продукты
Cable Tray CLICK KF…
Cable routing
Assembly of cable trays KF… with screwless connection in the following applications:
– in the electrical installations mounted on the grounded steel structures
– in the electrical installations with a voltage to 1kV
– in hydraulic, pneumatic systems, etc.
Benefits:
– Electrical continuity confirmed by the relevant certificate
– Fast and easy assembly
– Firm snap-in connection
– Deep stamping around the slots in the bottom increase the strength
– Dense perforation with stamping around the slots for excellent heat
exchange – designed to enable cable tray installation on supports from
BAKS anywhere within the system
– Slotted holes Ø11 in the cable tray bottom allow for suspension on a threaded rod
Versatile CLICK Fittings – New Product
Benefits:
– Fittings adjusted for standard cable trays and CLICK cable trays
ZPDN Cover Clamp – New Product
Protection of cover against slipping off
Benefits from application:
– Cover clamp made of stainless steel for increased strength and nice appearance
– High resistance against corrosion
– Modified clamps for improved interaction with the cover
– Versatile application to solid and perforated cable trays
– Complete with the bracket WSU…, with an option of a screwless cable tray assembly
Cover Clamp ZPNN… – New Product
Protection of cover against slipping off
Benefits from application:
– Modified shape allows for application in standard cable trays and wire mesh cable trays
– Cover clamp made of stainless steel for increased strength and nice appearance
– High resistance against corrosion
– Modified clamps for improved interaction with the cover
Barrier Strip PG…– New Product
Lengthwise division of cable trays
Benefits:
– New and versatile barrier strip fits to any perforation of cable trays – no need of hole drilling
NAP… Protection Cap for Barrier Strip
Features & Benefits:
– nice appearance of Barrier Strip closure
– protection against cable damage
– protecting installers against cut from steel edges,
Modified CLICK Connector for Wire Mesh Cable Trays KDSZ…
Connector modified to allow connecting cable trays also from the top – through additional cutting in the connector’s bottom
Fittings with perforation in the bottom KKSH…, and TKSH… – New Solution
Benefits:
– Large openings in the bottom for easy exit of cables
– Protection caps for additional protection of cables against damage
– Improved ventilation of cables
Wire Mesh Cable Tray KDSD300H50, Connector LKDSC, and Ceiling Hangers UKDSC, UKDSPC
Cable routing
Benefits from application:
– Possibility of assembly directly to the ceiling
Wire Mesh Elbow KKSD…
Benefits:
– Low weight of elements for easy elbow assembly
– Fast assembly
– Lower price as compared to the steel solid elbows
– Ready to use product of 60 – 300 mm widths
– Assembly with the standard wire mesh cable trays and with wire mesh cable trays KDSZ…
Wire Clamp for Wire Mesh Cable Trays USKD
Assembly of 60 mm wire mesh cable trays with the standard brackets directly to the wall or to the floor
Benefits:
– Extremely fast and screwless assembly of wire mesh cable tray
Snap-in Support PMMCS…
Fixing the wire mesh cable trays
Benefits:
– Extremely fast and screwless assembly of wire mesh cable trays
Mounting Connector for the Fittings PKKS, PSKS, PDKS
Fast arrangement of wire mesh fittings
Benefits from application:
– Adjusting the elbows to wire mesh cable trays
– Screwless pre-assembly
– Strengthening the construction with a screw
– Adjustment of the elbow internal radius
Hanger UKWD
Fixing the wire mesh cable trays KDS50H35, KSG50H35, KWDS60H60 to the brackets WW, WPLS, WPTS, and to the channels
Benefits from application:
– Fast installation
Angle Connector LKSUC
Branching out cable routes in any spot of the wire mesh cable tray. Suits cable trays 60 and 110 mm high
Benefits from application:
– Branching out cable routes
– Fast and reliable screwless assembly in any spot of cable route
Wire Hanger WSKD
Suspending wire mesh cable trays to the ceiling – Assembly of wire mesh cable trays 60 and 100 mm high
Benefits:
– Extremely fast and screwless assembly of wire mesh cable tray
– Fast assembly directly to the ceiling or using a threaded rod
– Hangers suit cable trays 60 mm high
Hanger USH
Assembly of wire mesh cable trays to the brackets
Benefits:
– Fast assembly of accessories to wire mesh cable trays
– Assembly of wire mesh cable trays on brackets with standard perforation
Blind End ZKLS
Closing the cable runs
Benefits from application:
– Fast and screwless assembly
– Aesthetic appearance of cable run closing
Wire Clamp CZD
Wire clamp allows for extremely fast and screwless assembly of cable trays and wire mesh cable trays of H60 height with constructions based on the channels 40H20, 40H22, 41H21, 40H40 i 41H41 mm, with the brackets WPL…, WTL…, WPT/WPTO… and WWT
Cable Ladder CLICK DF…
Cable routing
Assembly of cable ladders DF… with screwless connection in the following applications:
– in the electrical installations mounted on the grounded steel structures
– in the electrical installations with a voltage to 1kV
– in hydraulic, pneumatic systems, etc.
Benefits:
– Electrical conductivity confirmed by the Certificate issued at the relevant Institutes in Germany
– full perforation in the sides allows for connecting cable ladder in any spot after cutting, and another cable ladder or a fitting can be joined with the use of connector – no drilling is needed
–Fast and easy assembly
– Firm snap-in connection
– No connectors are needed
Product
Hold Down Clamp UDU… – Versatile
Fixing the self-supporting cable trays and ladders of 100, 110, 120, 150 and 200 mm height to I-Beam
Benefits from application:
– Fast and easy assembly of self-supporting cable trays and ladders on steel constructions
– The top rotary part allows for symmetrical clamp assembly (in line)
– Two versatile clamps with height adjustment: one for the cable trays and ladders 100, 110, 120 mm high and one for the cable trays and ladders 150, 160, 200 high
Mounting Set for Cable Ladder ZMD…
Cable Ladder assembly upside down onto the wall with the use of channels
Benefits from application:
– Fast and easy assembly
–In this particular type of cable ladder assembly extremely high strength parameters are obtained with the muntin bar application
Cable Ladder Holder UDD
Fixing the cable ladders and self-supporting cable ladders to I-Beam
Benefits from application:
– Assembly in any spot of the cable tray’s side
– Fast and easy cable ladder assembly to steel structures with I-Beam or angle profile
Dense side perforation – New Solution
Benefits:
– Full perforation in the sides allows for connecting cable tray or cable ladder in any spot after cutting, and another cable tray or cable ladder, or a fitting can be joined with the use of connector – no drilling is needed,
– Improved ventilation of cables in self-supporting cable trays
Protection cap NODS
Benefits:
– Protection of installer in case of contact with sharp edges in the cable tray or self-supporting cable tray cutting point
– Improving overall aesthetic appearance
– Protection of cables against damage while pulling
Galvanized Junction Box POPZA… with the Lock of Opening and Aluminum Cover for Protective Conduits, a Junction Box for the Channels POKZA…
Complete junction box ready for direct installation on raised floors and concrete floors. The box with galvanized and aluminum elements designed for application in a dry environment
Benefits:
– Universal cover which allows installation in the lining, gres or stone
– Adapted to the electrical accessories- module 45 standard
– Fast and intuitive box assembly
– Different material finishing (aluminum and stainless steel)
– Adjustable junction box height
– Knockout holes for protective conduits
Galvanized Junction Box POPA… with the Aluminum Cover for Protective Conduits, Junction Box for the Channels POKA…
Complete junction box ready for direct installation on raised floors and concrete floors. The box with galvanized and aluminum elements designed for application in a dry environment
Benefits:
– Universal cover which allows installation in the lining, gres or stone
– Adapted to the electrical accessories- module 45 standard
– Fast and intuitive box assembly,
– Different material finishing (aluminum and stainless steel)
– Adjustable junction box height
– Knockout holes for protective conduits
Ship Cable Tray and Cable Ladder Systems
The tests are currently being performed with BAKS Ship Cable Tray and Ladder Systems which have been approved for use on ships and oil rigs. Positive test results are to be confirmed by the relevant certificate
Product Tray
Product Ladder
Luminaire Cable Tray CLICK KLF…
Suspending luminaire runs
Benefits:
– Fast and easy assembly
– Firm snap-in connection
– No connectors are needed
Channel CLICK CMF…
Fast and screwless assembly of supporting structures for the lamps – no connectors are needed. Creating the trusses in large production halls or warehouse facilities in the form of supporting constructions for fixing the variety of installation equipment. Unique system of channel connection with excellent strength parameters
Benefits:
– Electrical conductivity confirmed by the Certificate from the Institutes in Germany
– Fast assembly
– Firm snap-in connection
– No connectors are needed
– Wide range of available sizes: 41H41, 41H62, 50H50, 60H60 i 100H100
Product CMF…41H41
Product CMF…41H62
Product CMF…50H50
Product CMF…60H60
Product CMF…100H100
New sizes of the Channels CM…41H21, CMP…41H42, CM…41H41, CMP…41H82
Benefits:
– Channel sizes adjusted to the European standards
– Double riveted channels significantly improve strength parameters
Fast Assembly Channel Nut – Rhomboid NSP for the Channel Connectors, and Channel Connector LCSP…
Benefits:
– Elastic mechanism for comfortable positioning of the fixed element by pressing down and moving
– Serrated rhomboid nut used for strong connection and safety
– Fast montage allows for savings in time and effort both at assembly and dismantling
Spacer BR…
Benefits:
– Improved strength parameters
– Wide range of sizes allows for optimal selection of the suitable ceiling bracket
– The special shape prevents the plate from falling down into the profile slotted hole at assembly
Channel Connectors LCWL…, LCWLL…, LCWLP…, LCWT… LCWCZ…
Connecting the constructions to the channels of 50, 80 and 100 mm widths.
Benefits:
– Fast method to arrange spatial constructions with the channels
– Special cuttings allow assembly both to the face or through the connector
– Firm and stable channel connection
– Possibility of connection with the standard screws on each side of a channel
Product LCWL
Product LCWLL
Product LCWLP
Product LCWT
Product LCWCZ
Connectors LCWL, LCWLL, LCWLP, LCWT, LCWCZ
Connecting the constructions with the channels 40 and 41 mm wide
Benefits:
– Fast method to arrange spatial constructions with the channels
– Special cutouts for the channel assembly directly to the face or with the use of through holes
– Firm and stable channel connection
– Perforation adjusted to all channels of 40H40 and 41H41
– Possibility of connection with the standard screws on each side of a channel
Product LCWL
Product LCWLL
Product LCWLP
Product LCWT
Product LCWCZ
Support for Rooftop SDB…
Modular system of supports used for the installation of cable runs, air conditioning devices, tubes, power generators, walkways, photovoltaic solar panels, etc., directly on flat roofs. The system adjusted to support channels 40×40 or 41×41. Through application of anti-slip insulation a srewless assembly is possible directly to the roof
Benefits of application:
– Assembly of supporting structures on roofs with tar paper – no harm is made to the roof sheeting
– Anti-slip insulation mat provides for uniform load distribution
Base Plate PVC
Assembly of channels to the base or to the ceiling
Benefits:
– Easy assembly of the channels 50H50, 80H80 and 100H100 to the base, or to the ceiling
– Arrangement of firm constructions
Bracket WWS… (modified)
Suspending cable routes
Benefits:
– Extended bracket can be attached on each side of the Head Plate from BAKS along with the channel of 40 mm size including the open side – no additional elements are needed
– Easy access for the installer without the need to use specialist tools
Bracket WSU
Suspending cable routes
Benefits:
– Cover assembly using the same clamp is possible after the cable laying operation
– Assembly of cable trays, wire mesh cable trays and cable ladders
– Thanks to high elasticity ZAPU clamps allow for the channel assembly both with the use of cover or without cover
– Easy and fast assembly
– Assembly to the wall or to the bracket with one screw only
– Increased width allows for assembly to the open part of the channels 40 mm and 41 mm.
– Bracket adjusted to screwless assembly of cable trays using the clamps soon available in the offer
Center Hanger ZCS1
Suspending cable routes
Benefits:
– specially serrated surface provides for additional protection for the clip against slipping off
–Ø 14 mm opening allows for screwless assembly of cable clips OZC…, , or alternatively, the assembly of threaded rods and hooks
– A solid base to install firm fixing on steel constructions without drilling and welding
Head Plate with Barrier Strip PSBR
Suspending cable runs on double channels
Benefits from application:
As a complementary solution for the system
– Extremely strong base for any new double channels 41H82 (PSBR)
– Integrated spacer in the base for protection of the channels against deformation- reduction of time needed for assembly
– Possibility to install the bracket on each side of a channel (also on the open side, which allows for smooth bracket adjustment)
Head Plate PSKK
Benefits from application:
– As a complementary solution for the system
– Extremely sturdy base for the channels
– Special type of construction reduces the time of assembly and prevents the channel from deformation
Head Plate PSB
Fixing the threaded rod, cable clip, etc. to I-Beams, angle profiles, etc.
Benefits:
– As a complementary solution for the system
– Extremely sturdy base for the new double channels 41H42
– Special type of construction reduces the time of assembly and prevents the channel from deformation
– Assembly of brackets to the open side of the channels which allows for smooth regulation
Beam Clamp ZCD… and Cable Clip OZC…
Fixing the threaded rod, cable clip, etc. to I-Beams, angle profiles, etc.
Advantages of ZCD:
– Specially serrated surface for additional protection of the fixed beam clamp against slipping off
–Ø 14 mm opening in the threaded rod or in the hooks
– Provides a good basis for firm fixing on steel structures without drilling and welding
Advantages of OZC:
– Fast and easy assembly with using the beam clamp
– Plastic washer on a screw for protection against falling out at assembly
– Wide range of cable diameters for any size of cable clip
Ceiling Bracket WPCB… and Bracket WWB …
Bracket adjusted to suspending cable routes on the ceiling bracket WPCB….
Benefits from application:
– Very fast and easy assembly
– Increased strength
Anchor KHZ6- with a closed hook and Eye Anchor KO6
Fixing the ceiling constructions to a concrete base
Benefits from application:
– Fast assembly
– Easy length adjustment
– Easy to remove
Self Locking Nut NSAM…
For connecting system elements exposed to vibrations, and in a seismic environment
Benefits:
– Nuts with protection against self-loosening
– No washers are needed (extremely fast and easy assembly)
KRDP Expansion Bolt – New and SMART version
A cap at the end of threaded rod for protection of thread against damage
Benefits from application:
– Two components used for improved bolt expansion and for obtaining high load capacity regardless of the base surface
– SMART bolt action depending on the type of surface (expansion, distribution, looping), now with even wider range of applications
– Superb expansion in any situation – intuitive recognition of the bolt maximum expansion point
– No bolt rotation while screwing due to specially shaped teeth
– A hole in the bolt for easy screwdriving and firm fastening
– The longer bolt version allows to break through any hard surface
Nylon Adjustable Fixing KRNU…
Benefits:
– Small diameter of opening (10 mm) and short adjustable element (39 mm) provide for easy assembly in a narrow or insulated slot
– Two-component adjustable element reinforced with glass fibre and T-bushing for obtaining high pull-out and shear resistance capacity
– The fixing does not interfere with plasterboard, and consequently, the base surface is not weakened
– Universal type of seating allows for connection with a threaded rod, rod with metric thread, and a nut
– In solid materials such as concrete and wood anchor bolts can be used
– Easy process of pre-assembly – with the use of T-bushing bolts can be fixed without a screw
– Several fixing points may be used in a small distance from each other
– A screw can be loosened and tightened repeatedly
Screw SBSO6X4
Benefits:
– Screw SBSO6 with two different screwing depths for maximum versatility
– Low depth of a drilled opening and reduced depth of screwing allow for fast and easy assembly
– SBSO6 screw with reduced length and reduced screw-in depth is a rational and economical choice for variety of applications
– SBSO6 screw has been approved for multipoint fixing in non-structural systems. SBSO6O has been approved for fixing the stressed channel ceiling panels
T-Grid Clamp ZRT
Benefits:
– Allows for fixing the suspension cables, wires, S hooks, or chains to T-Grid
– Fast, simple, and safe assembly
– Assembly without tools
T-Grid Clamp ZRTS
Benefits:
– ZRTS allows for fixing the electrical accessories to T-Grid of acoustic modular ceiling
– Assembly without tools
– Fast, simple, and safe assembly
NGP Rod Cap
Placed at the end of rod for protection against damage
Benefits from application:
– Fast and easy assembly without tools
Cover Hinge ZPR
Fast lifting of cable tray’s cover
Benefits from application:
– Fast and easy assembly without tools,
– Assembly at any point of cable tray’s side
Cover Support PPKM…
Internal cover protection against bending while walking on cable trays
Benefits from application:
– Allows to walk safely on cable trays used for power supply to machines – reduced risk of cover deformation – should be used every 0,5 m
Barrier Strip POZ for Cable Hanger OZ/OZO
Separating the cables in a cable hanger
Benefits from application:
– Screwless assembly inside the cable hanger
– Barrier strip allows for separating cable bundles depending on the intended use
Cover Lock ZAMKN – New Product
Protection of cover against slipping off. DIY type of assembly in the cover
Benefits from application:
– An arrow placed at the screw head indicates the lock position
– Lock activation by turning to the right or the left
– Blockade of elements made of spring steel
– The lock adjusted to a torx or flat-head screwdriver
– Possibility of montage directly on the construction site
Shears NDCP…
Used for cutting the following rods: M6, M8, M10 and M12
Benefits from application:
– Cutting the threaded rods of three different diameters
– Precise, fast and burr-free cutting
– The process of cutting is harmless to a thread
– Comfortable handle provides for easy shears operation
– Shears arms of adequate length provide for effortless and smooth rod cutting
– Simple opening of the shears
Zinc Paste WSZINK
Efficient protection against corrosion
Benefits from application:
– Efficient protection against corrosion
– Variety of paste capacities according to the customer’s needs
– Paste in aerosol form for easy application
– Very high zinc content ~75% (over 90% in the pigment)
Battery Shears for Wire Mesh Cable Trays NAKS
Battery powered device for cutting wire mesh cable trays, also for fast and clean cutting of cable trays made of stainless steel up to 6mm thick.
Benefits:
– Open rotary cutting head
– Electronic control and monitoring of the cutting process
– Optional operation with one button only to control functions of all the tools
– Ergonomic two-element housing with soft handles for easy and safe operation with one hand only
– The balanced centre of gravity provides for simple and smooth shears operation
– LED backlight used in order to illuminate the workplace
– 18 volt Li-ion and NiMH batteries of high capacity and extremely short time of charging
– High-efficiency engines with the maximum working speed
– Energy-saving function – the engine is stopped immediately after cutting
– The engine is stopped immediately to increase the safety of shears operation
– Auto-retractable blade after cutting
– Retraction of the blade manually when necessary
– Multifunction LED backlight for the purpose of maintenance and with battery charge indicator
– Environment friendly hydraulic fluid with short period of biodegradation
Profile Nibbler PN200
Used for the C, L, U trapezoid sheet profiles deep to 85 mm, corrugated sheet of max. 2 mm thickness and strength value of 400 N/mm2
BENEFITS:
– Device with reduced tool length (for processing sheet profiles deep to 85 mm, and for the C-L-U profiles, cable trays, and corrugated sheet)
– Excellent solution in places with difficult access (working direction can be 360° changed easily, without tools, in 45-degree steps
– Extremely short time needed for the set-up (replacement of stamp and yoke is made without interruption – no tools are needed)
– Unrivalled speed of operation (fast and efficient, 2.1 m/min. for structural steel 400 N/mm2).
